MC3 Multi-gas Analyzer
Single MC3 analyzer measures gases including SO2 , NO , NO2 , N2O , CO, HCl, NH3 , CH4 , CO2 , H2O & O2
  •  Direct measurement (without converters) of up to 8 components
  •  Low maintenance system ideal for conditions encountered in the industrial facilities
  •  Sample system is optimized for your application - fully extractive “hot-wet”, “cold-dry” or even dual
  •  Powerful software allows for remote diagnostics and trouble-shooting
  •  Cost-effective system, especially if more than three gases have to be measured
  •  Process Control and Regulatory applications - complies with state and Federal regulations(40 CFR Part 60 and 75)
  •  Two decades of design and application experience with installations including chemical and refining facilities, power plants, waste-to-energy, pharmaceutical manufacture, cement kilns and hazardous waste incineration plants.
           Typical       Typical
Gas Low Range* High Range *
SO2 0-50 PPM 0-1,000 PPM
NO 0-20 PPM 0-500 PPM
NO2 0-20 PPM 0-500 PPM
N2O 0-100 PPM 0-1,500 PPM
CO 0-20 PPM 0-5,000 PPM
HCl 0-20 PPM 0-100 PPM
NH3 0-20 PPM 0-100 PPM
CH4 0-100 PPM 0-1,000 PPM
CO2 0-2% 0-20%
H2O 0-2% 0-25%
O2 0-10 % 0-25%

Weight 56 lb (25 kg) - analyzer only
Dimensions Standard 19in rack mount (W x H x D) 19 in x 8.75 in x 23 in (48 cm x 22 cm x 58 cm)
Flow Rate 2-7 liter per minute with ¼” Swagelok connectors
Display Menu-driven LCD Panel can be field-customized
Power 115 volts AC / 60 Hz or 220 volts AC / 50 Hz
Accuracy  2 % of full-scale value
Lower Threshold 1 % of lowest range
Response Time 10 seconds
Output Signals Analog: 8 signals of 0/4 – 20 mA;
Digital: 2 ports RS 232-C, 1 port RS 422-A;
Relays: Failure Indicator,
Service and Maintenance Operating Temperature 32 – 105°F (0 – 40°C)

  • Pre:none
  • Next:none
Copyright © 2018 Senshang. All Rights Reserved.